Weavers’ Hall, a 16-storey, 459-bedroom Purpose Built Managed Student Accommodation (PBMSA) development on Dublin Road in Belfast, built to the Passivhaus standard for Queen’s University Belfast, has been handed over by GRAHAM. It combines cluster apartments with studio units, alongside quiet study spaces, communal lounges, dining areas, laundry and reception facilities.
The building is the first student accommodation in the city built to the Passivhaus standard and the largest Passivhaus student scheme on the island of Ireland. At 16 storeys, it sits above the 35-metre tall-building threshold, making high-rise Passivhaus delivery the project’s central technical challenge.
PASSIVHAUSE STANDARDS SURPASSED
Passivhaus certification demands outstanding fabric performance across the whole building.
Weavers’ Hall’s key performance figures are:
- Space heating load: 9.5 W/m², comfortably below the Passivhaus threshold of 10 W/m²
- Space heating demand: 15.0 kWh/m² per year, meeting the Passivhaus limit of 15 kWh/m²
- Primary energy demand: 69 kWh/m² per year, within a project-specific target of 70 kWh/m² set to reflect the building’s high occupancy
- Airtightness: an average of 0.49 air changes per hour (ACH) at 50 Pascals across positive and negative pressure tests, beating the Passivhaus requirement of 0.6 ACH
Weavers’ Hall surpasses the Passivhaus airtightness requirement by almost a fifth. Delivering that result across 16 storeys and thousands of metres of façade interfaces required extensive thermal bridge modelling, façade reviews and installation workshops before construction began.
The team adopted an external self-adhesive airtight membrane and treated the steel frame system (SFS) as part of a service zone, so the continuous airtightness layer sat beyond the SFS line. A semi-centralised ventilation strategy let individual mechanical ventilation with heat recovery (MVHR) units serve apartments stacked vertically, reducing supply and extract penetrations through the external façade.















